Request Electrical Permit

Please fill out the below information for your electrical projects and click submit at the bottom.

REMI electrical permit application form

Name of the person filling out this permit application

Are you the agent of the owner?

Yes

I am the owner

A copy of this application form will be emailed to the email address that is entered here.

Phone

Select from the drop down menu the location type for this electrical project

sps316.012 Permits are required for an electrical project at any of the following locations: 1. A farm. 2. A public building, structure, or premises. 3. A place of employment. 4. A campground. 5. A manufactured home community / mobile home park. 6. A public marina, pier, dock, or wharf. 7. A recreational vehicle park. or 8. other location per Municipal ordinance.

Please enter project name, address and directions:

Example: office at 1316 N 14th Street, room 200 or if there is no address then provide directions to the location, other helpful landmarks, general contractor, etc.

Name of the building owner:

SPS 316.013(3)(a)(a) The building owner or their agent shall notify the inspection agency to provide electrical inspections when the electrical wiring installation is ready for inspection.

Phone number for the building owner:

Email for the building owner:

Enter the name of the electrical contractor and their Wisconsin license number:

State Statute 101.862 License or registration required. No person may engage in the business of installing, repairing, or maintaining electrical wiring unless the person is licensed as an electrical contractor by the department. No person may install, repair, or maintain electrical wiring unless the person is licensed as an electrician by the department or unless the person is enrolled as a registered electrician by the department.

Enter the Master Electrician name, Wisconsin License #, phone & email:

State Statute 101.862 License or registration required. No person who is not a master electrician may install, repair, or maintain electrical wiring unless a master electrician is at all times responsible for the person’s work.

Provide a description of the electrical wiring installation and any other notes or comments:

Examples: wiring up a new building, alterations to wiring in an existing building, adding a new subpanel, upgrading the service equipment, adding an outlet, installing low voltage cabling, etc. SPS316.003 A wiring installation is a new, reconstructions, alterations, extensions to an electrical system.

Enter the quantity & type of ELECTRIC UTILITY SERVICES:

Example: Temp service, upgraded service, permanent service, fire pump service, single phase service, three phase service, car charger service, line side tap to service meter, etc.

Enter the quantity of ADDITIONAL SERVICE DISCONNECTS after the first one:

Example: A main lug only service panel with 4 total service disconnects would be 3 additional disconnects.

Enter the quantity of FEEDERS:

A feeder is all circuit conductors between the power source and the final overcurrent device.

Enter the quantity of BRANCH CIRCUITS:

A branch circuit is the circuit conductors between the final overcurrent device protecting the circuit and outlet.

Enter the quantity of TRANSFORMER, REACTOR, SIMILAR COMPONENT:

Enter the quantity of LV CABLES for FIRE ALARM; COMM/DATA; SECURITY; PPOE, ETC:

Enter the quantity of GENERATOR & ONE TRANSFER SWITCH:

Enter the quantity of ADDITIONAL TRANSFER SWITCHES:

Enter the quantity of AC PV SOLAR ARRAYS WITH MICRO-INVERTERS:

Each array is a mechanically integrated assembly of modules or panels on a roof or support structure and foundation, tracker, and other components, as required, to form a single ac power production unit. Don't forget to add a feeder from the array output supply source conductors to a combiner panel and a feeder to the line or load side tap or device.

Enter the quantity of DC PV SOLAR ARRAY UNITS WITH ONE INVERTER:

Each array is a mechanically integrated assembly of modules or panels on a roof or a support structure and foundation, tracker, and other components, as required, to form a single dc power production unit to a single inverter. Don't forget to add a feeder from the inverter output circuit to the PV disconnect at the line or load side tap or device.

Enter the quantity of ADDITIONAL DC INVERTERS FOR A SINGLE LARGE DC PV SOLAR ARRAY UNIT:

Don't forget to add a feeder from the inverter output circuit to the disconnect of line or load side tap or device.

Enter the quantity of BATTERY STORAGE (ESS) units / (UPS) units:

Enter the quantity of WIND GENERATOR SYSTEMS:

Enter the quantity of SWIMMING POOLS, ETC:

Enter the quantity of ELEVATOR, ESCALATOR, DUMBWAITER, ETC:

Do you wish to have an electrical plan review?

Do you wish to have a preplanning consultation?

By entering my name below, I agree that this constitutes my legally binding signature for the purpose of submitting this permit application. I understand that this permit will become null and void if any information is found to be fraudulent and any paid fees are forfeited. I understand that this application is only for the scope of work described above. I understand that I am responsible for any additional scope of work, and I will pay for those additional fees. I agree to conform to all applicable laws of the State of Wisconsin and to the local authority having jurisdiction.

Signature

Drawing mode selected. Drawing requires a mouse or touchpad. For keyboard accessibility, select Type or Upload.